Propane Tank Policies
The gas container, liquefied petroleum system or LP system is a collective term by OSHA which refers to the piping, regulators, hoses, regulators, valves and fittings. Depending on the tank capacity, the agency needs specific components. These individual components have to undergo standard laboratory testing. The correct laboratory approval shows that the system components meet pressure, thickness and construction standards.
Tank Location
The OSHA is the organization which dictates how close the propane tank is situated to buildings, to ignitable materials, to tanks that contain inflammable liquids, welders and cutting torches. These stringent regulations are implemented to make the jobsite as safe as possible for the workers and other people who are nearby.
Nameplate Marks
LP systems require that the address, the name, the supplier of the container, and or the tanks brand name, be marked on the propane container. The capacity of the container is to be listed with the following details: gallons or pounds of fuel, square foot outside surface, fill level, and pressure. Additionally, information regarding whether or not the container is designed for installation above ground or underground is also visible. These markings need to be on a metal plate attached somewhere visible to the container. OSHA requires that every tank must be marked by the National Board of Boiler and Pressure Vessel Inspectors in order to be considered ready and safe to utilize.
Tank Modifications and Repairs
Any type of repairs to LP systems which require welding are regulated by OSHA. Repair workers and tank owners have to be familiar with standards and regulatory codes that the tanks were manufactured. Welding repairs to any system part that is subject to internal pressure must first follow these fabrication codes. Any other type of welding is only allowed on brakctes, saddle plates or lugs.
The OSHA works hard to make certain that people who work with lift trucks and in their vicinity are kept safe. They have stringent training procedures and rules in place so as to make sure that these industrial equipment and their repair processes are handled as safe as possible and with respect. It is very essential that companies follow their rules and steep fines could occur if they are not followed.