It is important to utilize extra care when using a rough terrain scissor lift. Operators must be completely aware of the surrounding environment. Long booms on the equipment act as levers from the center of the drive unit. Like for example, a 6 inch bump can lead to a 3 foot bounce when the operator is at the driver controls. Take into account all other traffic nearby, since they may not know that you are moving. Plan your assent cautiously. Park the boom lift on a flat surface that has no mud or water. These areas cover deep potholes that could be probably cause the occupants to fall if the tires fell into the holes. If provided, utilize all of the outriggers, completely extended. Be certain to just use approved wooden chalk blocks.
A lot of lifts work from a metal platform on the end of the boom. The long booms act as levers from the drive unit's center. A 6-inch bump could cause a 3-foot bounce while you are at the driver controls. Consider all other traffic. They might not know that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas can conceal deep potholes in which the lift tires can fall, tipping the occupants. Extend all outriggers, if provided, to the full extension position. Place just approved wooden chalk blocks beneath the outrigger pads to prevent the unit from moving.
Overhead power lines are a serious danger for lift operators regardless of what lift is being used. For example, if the operator of the platform is not being aware, or if the platform is being controlled by ground personnel that is not able to accurately access proximity to wiring and thus, either the platform itself or the worker could be easily brought into contact with electrical wires. The worker might be electrocuted unfortunately unless correctly insulated.